HINGE WITH ADJUSTABLE FRICTION AND THROUGH HOLE
Standard Colours
- Black Ral 9011
Colours on Request
- Black Ral 9011
Material
Reinforced polyamide.Resistant to oils and greases.
Surface
Satin.
Product Code
O460
Technical Description
Colour:
Black (RAL 9011).
Inserts:
(4) Galvanised steel pin.
(1) Stainless steel friction adjusting screw (Aisi 304).
(2) Stainless steel nut for adjusting screw (Aisi 304).
(3) Pivot pin cap in PA6.
Hole:
Through hole obtained by moulding the plastic for fixing screw (O460032=M04 O460047=M06).
Adjusting the friction device:
Using a screw driver to turn the adjusting screw (1), the friction can be set to a maximum of:
O460032: 0.8 Nm.
O460047: 4 Nm.
Special Requests:
None.
Black (RAL 9011).
Inserts:
(4) Galvanised steel pin.
(1) Stainless steel friction adjusting screw (Aisi 304).
(2) Stainless steel nut for adjusting screw (Aisi 304).
(3) Pivot pin cap in PA6.
Hole:
Through hole obtained by moulding the plastic for fixing screw (O460032=M04 O460047=M06).
Adjusting the friction device:
Using a screw driver to turn the adjusting screw (1), the friction can be set to a maximum of:
O460032: 0.8 Nm.
O460047: 4 Nm.
Special Requests:
None.
| Codice | art. | I | C | A | B | H | h | h1 | D | d1 | g | F1 (N) | F2 (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| O460032.0001 | O460032.TG04.501 | 32 | 25,5 | 45 | 38 | 13,5 | 6 | 7,5 | 9 | 4,5 (M4) | 17 | 700 | 1400 |
| O460047.0001 | O460047.TG06.501 | 47,5 | 38 | 63,5 | 58 | 20,5 | 8,5 | 11,5 | 12,5 | 6,5 (M6) | 47 | 1500 | 2250 |